275/35R22 vs 275/40R22
275/40R22 is taller than 275/35R22 by 3.66% — a diameter difference of 1.08″.
What changes between 275/35R22 and 275/40R22
Switching from 275/35R22 to 275/40R22 changes overall diameter by +3.66%, a taller tire by 1.08 inches. This sits in the 3–5% caution band, where rubbing at full steering lock or suspension compression becomes possible. Leveling kits or fender-liner trims are often needed on lifted trucks. Section width moves by 0.00″ (275mm → 275mm), which affects contact patch and fender-well clearance. Sidewall height shifts by +0.54″: a taller sidewall softens ride quality and adds off-road bump protection, with some loss of steering crispness. Revs per mile moves by -24, which translates directly to speedometer error — at an indicated 65 mph, actual speed becomes 67.4 mph. Both sizes share the same 22″ rim, so no wheel change is required — this is a pure tire-only swap.
| Spec | 275/35R22 | 275/40R22 |
|---|---|---|
| Overall diameter | 29.58″ | 30.66″ |
| Section width | 10.83″ (275 mm) | 10.83″ (275 mm) |
| Sidewall height | 3.79″ (35%) | 4.33″ (40%) |
| Rim diameter | 22″ | 22″ |
| Circumference | 92.92″ | 96.33″ |
| Revs per mile | 682 | 658 |
Interactive comparison
275/65R18 or "33" for inch aliases275/35R22
- Diameter
- 29.58″ / 751.3mm
- Section Width
- 10.83″
- Sidewall
- 3.79″ / 96.25mm
- Circumference
- 92.92″
- Revs/Mile
- 682
275/40R22
- Diameter
- 30.66″ / 778.8mm
- Section Width
- 10.83″
- Sidewall
- 4.33″ / 110mm
- Circumference
- 96.33″
- Revs/Mile
- 658
Speedometer & Diameter Impact
At an indicated 60 mph, your actual speed is 62.2 mph (100.1 km/h). Your speedometer reads 3.66% low versus actual speed.