285/65R20
285/65R20 is uncommon as OEM fitment but appears as an aftermarket upsize option. At 34.59″ diameter with a 7.29″ sidewall (65% of section width), this size turns 583 revolutions per mile.
About 285/65R20
285/65R20 is less common as a factory fitment but is available as an aftermarket size, so SKU selection is narrower than mainstream OEM sizes. At 34.59″ overall diameter, 285/65R20 turns 583 revolutions per mile, which is the reference point the factory speedometer and odometer were calibrated against. The 65% aspect ratio gives it a balanced sidewall — enough compliance for daily comfort without vague steering. The 20″ rim pairing is typical for luxury SUV and performance-oriented platforms, so compatible wheels are easy to source new or used. Going one step shorter to 305/60R20 drops diameter by 0.51%, which stays within the ±3% fitment safe zone for most vehicles. Stepping up to 295/65R20 adds 1.48% diameter — also inside the safe window, with marginally taller ride height. If you are shopping for a direct replacement, any tire within roughly ±0.7″ of the 34.59″ stock diameter (about ±2% in percentage terms) will keep ABS, TPMS, and odometer readings inside the vehicle's designed tolerance.
Compare with another size
275/65R18 or "33" for inch aliases285/65R20
- Diameter
- 34.59″ / 878.5mm
- Section Width
- 11.22″
- Sidewall
- 7.29″ / 185.25mm
- Circumference
- 108.66″
- Revs/Mile
- 583
265/65R20
- Diameter
- 33.56″ / 852.5mm
- Section Width
- 10.43″
- Sidewall
- 6.78″ / 172.25mm
- Circumference
- 105.44″
- Revs/Mile
- 601
Speedometer & Diameter Impact
At an indicated 60 mph, your actual speed is 58.22 mph (93.7 km/h). Your speedometer reads 2.96% high versus actual speed.