295/40R19
295/40R19 is uncommon as OEM fitment but appears as an aftermarket upsize option. At 28.29″ diameter with a 4.65″ sidewall (40% of section width), this size turns 713 revolutions per mile.
About 295/40R19
295/40R19 is less common as a factory fitment but is available as an aftermarket size, so SKU selection is narrower than mainstream OEM sizes. At 28.29″ overall diameter, 295/40R19 turns 713 revolutions per mile, which is the reference point the factory speedometer and odometer were calibrated against. The 40% aspect ratio gives it a low-profile sidewall that delivers sharp steering response but transmits road imperfections. The 19″ rim pairing is typical for full-size truck, premium SUV, and sport-sedan platforms, so compatible wheels are easy to source new or used. Going one step shorter to 285/40R19 drops diameter by 1.11%, which stays within the ±3% fitment safe zone for most vehicles. Stepping up to 305/40R19 adds 1.11% diameter — also inside the safe window, with marginally taller ride height. If you are shopping for a direct replacement, any tire within roughly ±0.7″ of the 28.29″ stock diameter (about ±2% in percentage terms) will keep ABS, TPMS, and odometer readings inside the vehicle's designed tolerance.
Compare with another size
275/65R18 or "33" for inch aliases295/40R19
- Diameter
- 28.29″ / 718.6mm
- Section Width
- 11.61″
- Sidewall
- 4.65″ / 118mm
- Circumference
- 88.88″
- Revs/Mile
- 713
275/40R19
- Diameter
- 27.66″ / 702.6mm
- Section Width
- 10.83″
- Sidewall
- 4.33″ / 110mm
- Circumference
- 86.9″
- Revs/Mile
- 729
Speedometer & Diameter Impact
At an indicated 60 mph, your actual speed is 58.66 mph (94.41 km/h). Your speedometer reads 2.23% high versus actual speed.