295/45R20
295/45R20 is uncommon as OEM fitment but appears as an aftermarket upsize option. At 30.45″ diameter with a 5.23″ sidewall (45% of section width), this size turns 662 revolutions per mile.
About 295/45R20
295/45R20 is less common as a factory fitment but is available as an aftermarket size, so SKU selection is narrower than mainstream OEM sizes. At 30.45″ overall diameter, 295/45R20 turns 662 revolutions per mile, which is the reference point the factory speedometer and odometer were calibrated against. The 45% aspect ratio gives it a low-profile sidewall that delivers sharp steering response but transmits road imperfections. The 20″ rim pairing is typical for luxury SUV and performance-oriented platforms, so compatible wheels are easy to source new or used. Going one step shorter to 285/45R20 drops diameter by 1.16%, which stays within the ±3% fitment safe zone for most vehicles. Stepping up to 275/50R20 adds 1.23% diameter — also inside the safe window, with marginally taller ride height. If you are shopping for a direct replacement, any tire within roughly ±0.7″ of the 30.45″ stock diameter (about ±2% in percentage terms) will keep ABS, TPMS, and odometer readings inside the vehicle's designed tolerance.
Compare with another size
275/65R18 or "33" for inch aliases295/45R20
- Diameter
- 30.45″ / 773.5mm
- Section Width
- 11.61″
- Sidewall
- 5.23″ / 132.75mm
- Circumference
- 95.67″
- Revs/Mile
- 662
275/45R20
- Diameter
- 29.74″ / 755.5mm
- Section Width
- 10.83″
- Sidewall
- 4.87″ / 123.75mm
- Circumference
- 93.44″
- Revs/Mile
- 678
Speedometer & Diameter Impact
At an indicated 60 mph, your actual speed is 58.6 mph (94.31 km/h). Your speedometer reads 2.33% high versus actual speed.