295/60R19
295/60R19 is uncommon as OEM fitment but appears as an aftermarket upsize option. At 32.94″ diameter with a 6.97″ sidewall (60% of section width), this size turns 612 revolutions per mile.
About 295/60R19
295/60R19 is less common as a factory fitment but is available as an aftermarket size, so SKU selection is narrower than mainstream OEM sizes. At 32.94″ overall diameter, 295/60R19 turns 612 revolutions per mile, which is the reference point the factory speedometer and odometer were calibrated against. The 60% aspect ratio gives it a balanced sidewall — enough compliance for daily comfort without vague steering. The 19″ rim pairing is typical for full-size truck, premium SUV, and sport-sedan platforms, so compatible wheels are easy to source new or used. Going one step shorter to 285/60R19 drops diameter by 1.43%, which stays within the ±3% fitment safe zone for most vehicles. Stepping up to 275/65R19 adds 0.42% diameter — also inside the safe window, with marginally taller ride height. If you are shopping for a direct replacement, any tire within roughly ±0.7″ of the 32.94″ stock diameter (about ±2% in percentage terms) will keep ABS, TPMS, and odometer readings inside the vehicle's designed tolerance.
Compare with another size
275/65R18 or "33" for inch aliases295/60R19
- Diameter
- 32.94″ / 836.6mm
- Section Width
- 11.61″
- Sidewall
- 6.97″ / 177mm
- Circumference
- 103.47″
- Revs/Mile
- 612
275/60R19
- Diameter
- 31.99″ / 812.6mm
- Section Width
- 10.83″
- Sidewall
- 6.5″ / 165mm
- Circumference
- 100.51″
- Revs/Mile
- 630
Speedometer & Diameter Impact
At an indicated 60 mph, your actual speed is 58.28 mph (93.79 km/h). Your speedometer reads 2.87% high versus actual speed.